Tools & Accessories

STRETCHERS BARS



• High quality stretcher bar with wedges and pulling lugs.
  
  You need to purchase a pair and then pull together with 2-3 RE-561 Stretcher Bar Pullers.

STRETCHER BAR WEDGES

• These spare wedges are great to have on hand in case you lose a wedge.

CLAMP STYLE STRETCHER BARS

• Clamp Style Stretcher Bar securely holds woven wire fence by tightening down the clamp bar with a set of 19 mm nuts.
  
  Designed to stretch up to ¼” mile at a time.
  
  Use with stretcher bar pullers. Tighten nuts using 19 mm socket on ½” drive rachet or 18 volt cordless drill.

STRETCHERS BAR & REPLACEMENT WEDGES

PULLERS

BARBED WIRE CRIMP SLEEVE



• Use this sleeve to join barbed wire. These must be crimped with the JM-592 or JM-578 crimp tool. 50 per jar.

ELECTRIC WIRE TAP



• Use this sleeve top tap into an electric fence wire. These must be crimped with the JM-592 or JM-578 crimp tool. 50 per jar.

12 1/2 GAUGE - 16 GAUGE

CRIMP SLEEVE



• Clamp Style Stretcher Bar securely holds woven wire fence by tightening down the clamp bar with a set of 19 mm nuts.
  
  Designed to stretch up to ¼” mile at a time.
  
  Use with stretcher bar pullers. Tighten nuts using 19 mm socket on ½” drive rachet or 18 volt cordless drill.
  

HIGH STRAIN CRIMP SLEEVE



• High quality stretcher bar with wedges and pulling lugs.
  
  You need to purchase a pair and then pull together with 2-3 RE-561 Stretcher Bar Pullers.

8-10 GAUGE CRIMP SLEEVE



• These spare wedges are great to have on hand in case you lose a wedge.

SPLICING SLEEVES

CRIMP TOOL

AFFIXING DRILL CHUCK



• The fence post clip is placed around the fence fabric and the steel fence post. The two tails of the clips are then inserted into the drill chuck. The chuck then twists the tails tightly to the steel fence post.

POST CLIP



• The clip is slid around the post and fence wire and then the tails of the clips are put into the LC-580 chuck. The drill then twists the wire very tightly around the post.

UNIVERSAL T-POST CLIPS



• Stay-Tuff t-post clips are made of class 3 galvanized 11 gauge steel wire and are shaped to fit common t-post weights: 1.25, 1.33, and 1.5 lbs/ft. T-post clips are sold in buckets of 600 clips.
  
  To install, slide around the post and over fence wire, pinch the two wire tails of the clip together and push them into the LC-580 chuck. Pull and hold down the trigger of the drill to tighten clip, drill will spin free when clip is tightened.

TURF STAPLES



• The fence post clip is placed around the fence fabric and the steel fence post. The two tails of the clips are then inserted into the drill chuck. The chuck then twists the tails tightly to the steel fence post.

STAPLES



• The clip is slid around the post and fence wire and then the tails of the clips are put into the LC-580 chuck. The drill then twists the wire very tightly around the post.

TIE WIRE

SHADE CLOTH

AFFIXING DRILL CHUCK

POST CLIP

UNIVERSAL T-POST CLIPS

TURF STAPLES

STAPLES

TIE WIRE

SHADE CLOTH

GRIPPLE 10-14 GAUGE HIGH TENSILE



• The Gripple Wire Joining & Tensioning System significantly reduces the amount of time and labor needed to install and maintain your fence. No tying knots or crimping! Gripple allows you not only to join wire, but to tension wire too. Each Gripple is fitted with a ceramic roller mechanism that allows movement in one direction only, resulting in the ability to always tension the wire.
  
  The high performance, engineering grade ceramics provide a secure grip on all types of wire and have excellent corrosion resistance to sprays and fertilizers. Gripple is also available for Barbed wire.
  
  Quantity: 40 per container.

GRIPPLE 12.5 GAUGE



• The Gripple Wire Joining & Tensioning system significantly reduces the amount of time and labor needed to install and maintain your fence. No tying knots or crimping! Gripple allows you not only to join wire, but to tension wire too. Each Gripple is fitted with a ceramic roller mechanism that allows movement in one direction only, resulting in ability to always tension the wire.
  
  The high performance, engineering grade ceramics provide a secure grip on all types of wire and have excellent corrosion resistance to sprays and fertilizers.

GRIPPLE T-CLIP



• The Gripple T-Clip is a revolutionary new way to secure a fence at the start or at the ends. This product eliminates timely knotting and stapling wires at straining posts with one fast, simple, twist & push action. Gripple T-Clips are available in quantities of 25 and 200 per container.

GRIPPLE TENSIONING TOOL



• The Gripple torque tensioning tool not only tensions wire but regulates the load applied, delivering consistent results every time and maximizing the life of the wire. Features settable tension guide, measure from 50 kg to 400 kg, set & go consistent tension every time, delivers up to 400 kg of tension with minimum effort, designed for use on all Gripple Plus products.

GRIPPLE ACCESSORIES & TOOLS